Customer Reviews
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Showing 36–40 of 46 reviews with 4 stars without photos
Clear Filters
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Just used this to cut a bunch of MFT holes using the LR32 rail and my Dewalt DW618 router. This works well, but plastic feels a little delicate. Slide movement was stiff at first but improved with use. Moving the router and guide along the rail can be done most easily with the hand on the guide that lifts the pin — thumb and forefinger pull up the pin and lower part of the hand pushes along the angled block around the pin. Pin registration in holes was perfect.
Fit my 7485 fine, one thing you have to consider is max blade height. If you crank the blade too high the fabric “bump” on the left side of the blade pushes the clearance insert up. Max blade height is about 2″ with it installed, which isn’t a problem with that saw really, since you don’t get much higher than 2″ normally.
The kit appears to be as described. Unfortunately the items were shipped almost a week after the promised delivery date. So this tells me the items were not in stock. Once the items were finally shipped they arrived quickly. I have to sent to family in US because the cost to ship to Canada is outrageous. There are no duties for US made items coming into Canada. I will be picking up the Incra tracks to use with my Makita Tracksaw. Now sadly much less to purchase.
Just attached the adapter to my DeWalt DNP 612 trim router and used it with a Festool 1400/2 guide rail. Worked perfectly. An improvement would be to add a centerline mark for the center of router bit.
Works perfectly, was surprised to find out it fit a few of my various Dewalt tools