Customer Reviews
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Showing 16–20 of 49 reviews with 4 stars
Clear Filters
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Insert arrived and fit perfectly, but without a cut slot for the sawblade. This may be standard, so I assumed I had to make the cut myself. Did so, but slowly raising the 10″ blade to its maximum height, I broke the front edge of the riving slot already cut in the insert a bit in order to fit my riving knife which rose higher than the insert slot made room for. No big deal, but left me wondering . . .
What is the minimum width?
I have 16mm slots.
Will they fit?
Good solid products but I need to return them as neither of them fit.
The adapter is well made. Ducting is confusing as heck. I wanted to connect my 12″ Metabo Chop Saw to my FEIN turbo. I bought a connector for 1 1/4 hose. It was a little small on the turbo end so I turned it slightly larger on my lathe. It now fits great.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.