Hose Adapter for Makita Track Saw

Only when the two models share the same dust port. Each adapter is shaped for the port on the models named in the listing, so our Hose Adapter Cover for Dewalt Trim Router fits both the DWP611 and the DCW600, and our Makita GSL02 miter saw adapter also fits the GSL03. A different tool from the same brand usually has a different port: the Dewalt DW616 and DW618 plunge routers take a different adapter than the trim routers, the Dewalt 734 planer a different one than the DW735, and our two Makita LS miter saw adapters are split by whether the slide rails extend from the rear or sit on the front-left of the saw. Check the models named on the product page or use the Adapter Finder before you order.

Order the size of the hose you are plugging into the adapter, not the size of the tool’s port. 27mm and 36mm are for antistatic dust extractor hoses: 27mm is the hose most of those extractors ship with, 36mm is the larger optional hose, and all of our 36mm versions also fit the D36/32 hose. 1-1/4″, 1-7/8″ and 2-1/2″ are for standard shop vac hoses, and if a size is not in the Hose Size menu on a product page, that adapter is not offered in that size. Our No Snag dust ports are the exception: they come with one twist-lock hose adapter in either metric, which fits 27mm and 36mm hoses, or imperial, which fits 1-1/4″ and 1-7/8″ hoses.

A No Snag port replaces the swiveling dust port that came on your track saw rather than attaching to it. The original port lets the weight of the hose swing it downward so the hose catches on the track or workpiece; the No Snag port does not swivel and angles the hose up and away from the cut. It ships with the port connector plus one twist-lock hose end in the size you choose, metric (27mm and 36mm hoses) or imperial (1-1/4″ and 1-7/8″ hoses), and the hose end screws off so you can change hose sizes without tools. We make them for Makita (corded, 36V and 40V), Bosch, Dewalt, Kreg, Mafell, Milwaukee, Ridgid, Ryobi and Wen track saws.

Yes. All of our hose adapters are 3D-printed from a high-density, gyroid-filled PLA+ plastic, and we manufacture them ourselves.

No. Our Hose Adapter Cover for Dewalt Trim Router is not clear and closes off the whole opening in the base for the best suction, so you see the bit only through the router base, not through the cover.