Customer Reviews
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Showing 26–30 of 49 reviews with 4 stars
Clear Filters
Every review, across every ToolCurve product — straight from the woodworkers who use them.
I have not tried this yet but I like the fact that it will work for both the regular base and the plunge base
They slide in fine; I have not used them yet.
I tested it out and it worked well with my Kreg ACS track. I dropped it though, and it cracked. The price is too high.
The unit is nicely constructedand arrived on time. The placement of the pounting hole doesn’t allow for the router to plunge all the way to the bottom of its intended travel. I moved the adapter back and drilled new holes which allow the plunge travel to come all the way down. I also added a piece of plexiglass on top of the base to increase the effectiveness of the adapter.
The unit is nicely constructedand arrived on time. The placement of the pounting hole doesn't allow for the router to plunge all the way to the bottom of its intended travel. I moved the adapter back and drilled new holes which allow the plunge travel to come all the way down. I also added a piece of plexiglass on top of the base to increase the effectiveness of the adapter.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.