Customer Reviews
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Showing 11–15 of 26 reviews with photos
Clear Filters
Every review, across every ToolCurve product — straight from the woodworkers who use them.
Works great. Used on the router to slab mill an endgrain. Greatly reduced dust.
Works great. Used on the router to slab mill an endgrain. Greatly reduced dust.
It is not tight enough on the shown dust collector.
It is not tight enough on the shown dust collector.
Very happy to find a solution so the TSO square doesn\’t tip. Easy to install and works great. I had purchased a different square with a lip and stopped using the TSO square because it was unwieldy. The TSO square is larger and so more accurate than the smaller one with the lip, but now I can go back to using the TSO square. I haven\’t used the scale, but will see if it helps me in the future. Nice job, Toolcurve.
Very happy to find a solution so the TSO square doesn\'t tip. Easy to install and works great. I had purchased a different square with a lip and stopped using the TSO square because it was unwieldy. The TSO square is larger and so more accurate than the smaller one with the lip, but now I can go back to using the TSO square. I haven\'t used the scale, but will see if it helps me in the future. Nice job, Toolcurve.
The unit is nicely constructedand arrived on time. The placement of the pounting hole doesn’t allow for the router to plunge all the way to the bottom of its intended travel. I moved the adapter back and drilled new holes which allow the plunge travel to come all the way down. I also added a piece of plexiglass on top of the base to increase the effectiveness of the adapter.
The unit is nicely constructedand arrived on time. The placement of the pounting hole doesn't allow for the router to plunge all the way to the bottom of its intended travel. I moved the adapter back and drilled new holes which allow the plunge travel to come all the way down. I also added a piece of plexiglass on top of the base to increase the effectiveness of the adapter.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.
The part is constructed very nicely. The only issue I found and it may be specific to the 2 1/2” adapter is that the adapter gets in the way of the router being able to plunge all the way down. I moved it back and drilled 2 holes through the thicker part of the adapter and secured it with 25 mm screws. Works great. A minor modification to add the additional holes would be great.